1. School of automobile, Chang'an University, Xi'an Shannxi 710064, China;
2. Department of automotive engineering, Shandong college of highway technician, Jinan Shandong 250104, China
Supplier Selection and Order Allocation Research on Purchasing Management in Supply Chain Enterprises under the Total just-in-time Environment
HAO Li1, HU Da-wei1, LI Chen2
1. School of automobile, Chang'an University, Xi'an Shannxi 710064, China;
2. Department of automotive engineering, Shandong college of highway technician, Jinan Shandong 250104, China
摘要To optimize the supplier selection and order allocation procedures of purchasing management and improve their efficiency, this study employs mathematical statistics theory and optimization algorithm in building a two-stage analysis method implemented in MATLAB and LINGO software. Specifically, the AHP-EM and TOPSIS methods are used to select the suppliers in phase 1. The weights produced in stage 1 are applied to the multi-objective mixed-integer programming model to study the order allocation in phase 2. On the basis of an example, the impact of information sharing rate on supplier selection, order allocation, and total cost is determined. Finally, the solution to this problem under the Total just-in-time environment is found to be better than that in the general environment. The study of this issue offers important theoretical and practical significance by extending supply chain management theory, improving the enterprise supply chain management level, and enhancing the core competitiveness of enterprises.
Abstract:To optimize the supplier selection and order allocation procedures of purchasing management and improve their efficiency, this study employs mathematical statistics theory and optimization algorithm in building a two-stage analysis method implemented in MATLAB and LINGO software. Specifically, the AHP-EM and TOPSIS methods are used to select the suppliers in phase 1. The weights produced in stage 1 are applied to the multi-objective mixed-integer programming model to study the order allocation in phase 2. On the basis of an example, the impact of information sharing rate on supplier selection, order allocation, and total cost is determined. Finally, the solution to this problem under the Total just-in-time environment is found to be better than that in the general environment. The study of this issue offers important theoretical and practical significance by extending supply chain management theory, improving the enterprise supply chain management level, and enhancing the core competitiveness of enterprises.
基金资助:Supported by the Project of Fundamental Research Funds for the Central Universities of China (No.310822151030)
通讯作者:
HAO Li
E-mail: 524711728@qq.com
引用本文:
郝丽, 胡大伟, 李晨. T-JIT环境下企业供应链中采购管理供应商选择和订单分配研究[J]. Journal of Highway and Transportation Research and Development, 2018, 12(3): 80-89.
HAO Li, HU Da-wei, LI Chen. Supplier Selection and Order Allocation Research on Purchasing Management in Supply Chain Enterprises under the Total just-in-time Environment. Journal of Highway and Transportation Research and Development, 2018, 12(3): 80-89.
[1] WOMACK J R. Change the Machine of the World[M]. SHEN Xi-Jin Translation. Beijing:Commercial Press, 1999.17-54.(in Chinese)
[2] GREEN JR K W, ANTHONY INMAN R, BIROU L M, et al. Total JIT(T-JIT) and Its Impact on Supply Chain Competency and Organizational Performance[J]. Journal of Production Economics, 2014, 147:125-135.
[3] PAZHANI S, VENTURA J A, MENDOZA A. A Serial Inventory System With Supplier Selection and Order Quantity Allocation Considering Transportation Costs[J]. Applied Mathematical Modelling, 2016, 40:612-634.
[4] RODOLFO R M, DIANA S P, JOSÉ LUIS M F, et al. A Case Study:SMED & JIT Methodologies to Develop Continuous Fiow of Stamped Parts into AC Disconnect Assembly Line in Schneider Electric Tlaxcala Plant[J]. 15th IFAC Symposium on Information Control Problems in Manufacturing. 2015, 3(48):1399-1404.
[5] CEBI F, OTAY Í. A Two-stage Fuzzy Approach for Supplier Evaluation and Order Allocation Problem with Quantity Discounts and Lead Time[J]. Information Sciences, 2016,339:143-157.
[6] SCOTT J, HO W, DEY P K, et al. A Decision Support System for Supplier Selection and Order Allocation in Stochastic, Multi-stakeholder and Multi-criteria Environments[J]. Production Economics, 2015,166:226-237.
[7] KAMRAN S. MOGHADDAM. Fuzzy Multi-objective Model for Supplier Selection and Order Allocation in Reverse Logistics Systems Under Supply and Demand Uncertainty[J]. Expert Systems with Applications, 2015,42(15/16):6237-6254.
[8] CHEN S Y, CHEN R Q. Relationship Between Supplier and Manufacturer under the Condition of JIT Purchase[J]. Journal of Management Engineering, 1998,12(3):46-52.
[9] ZIMMER K. Supply Chain Coordination with Uncertain Just-in-time Delivery[J]. International Journal of Production Economics, 2002.5(77):1-15.
[10] ÖZGEN D, ÖNVT S, GVLSVN B, et al. A Two-phase Possibilistic Linear Programming Methodology for Multi-objective Supplier Evaluation and Order Allocation Problems[J]. Information Sciences,2008,178:485-500.
[11] ÖZGEN D, GVLSVNN B. Combining Possibilistic Linear Programming and Fuzzy AHP for Solving the Multi-objective Capacitated Uulti-facility Location Problem[J]. Information Sciences,2014,268:185-201.
[12] YANG Yan. Study of Supplier Selection Based on Genetic Algorithm[D]. Chengdu:Southwest Jiaotong University Master Degree Thesis, 2009. (in Chinese)
[13] HU Yan-chun. Research on Supplier Selection Strategy in JIT Purchasing[J]. Journal of China Management Informationization, 2008,10(11):82-83.(in Chinese)
[14] GUO Ting-ting. Research on the Model of Vendor Selection and Purchasing Quantity Allocation in JIT Purchase Environments[D]. Shenyang:Northeastern University, 2008.(in Chinese)
[15] XU Yan-fei. Research on the Optimal Number of Suppliers and Order Allocation Problem under Uncertainty Environment[D]. Qinhuangdao:Yanshan University, 2013.(in Chinese)
[16] ZHANG Cui-hua, ZHU Hong, MA Lin. The Model of Order Allocation for JIT Purchasing and Its Simulative Application[J]. Journal of Northeastern University:Natural Science, 2006,11(27):1291-1294.(in Chinese)
[17] XIONG Yun-feng, CHEN Zhang-lan, YUAN Hong-li. Comprehensive Evaluation of Ship Performance Based on Synthesized Weight and TOPSIS[J]. Journal of Ship Engineering, 2012,34(3):28-31.(in Chinese)
[18] JIANG Yan-ning, HAO Shu-chi. Inventory Allocation and Location Decision Model Based on Partial Cross-level and Centralized Storage[J]. Journal of Highway and Transportation Research and Development, 2016,11(33):152-158.(in Chinese)
[19] WEI Shu-di, JIANG Xiao-qi. A Single-Factor Fuzzy Evaluation Method of Using Information Entropy to Determine the Property Weights[J]. Journal of Computer Engineering and Science, 2010,32(7):93-94,107.(in Chinese)
[20] KONG Feng, LIU Hong-yan. Improvement on Algorithm for Final Priorities of AHP Based on Ideal Solution[J]. Journal of Systems Engineering, 2007,25(4):98-103.(in Chinese)
[21] LIU Kui, ZHANG Kun, WANG Cui-rong. Background Modeling Algorithm that Uses Chebyshev Inequality[J]. Journal of Computer Applications and Software, 2012,29(4):53-56.(in Chinese)
[1]
李高盛, 彭玲, 李祥, 吴同. 基于LSTM的城市公交车站短时客流量预测研究[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 65-72.
[2]
胡宝雨, 赵琥, 孙祥龙, 王弟鑫, 刘宁. 城市公交与农村客运同步换乘模型研究[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 73-79.
[3]
郭建科, 邱煜焜, 白家圆, 王利. 基于城市公共交通可达性的医疗服务空间分异及均等化研究——以大连市为例[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 80-89.
[4]
赵妮娜, 赵晓华, 林展州, 葛书芳. 主线分流互通立交指路标志版面形式研究[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 90-102.
[5]
姜明, 陈艳艳, 冯移冬, 周瑞. 路侧示警桩设置关键指标研究[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 79-87.
[6]
蔡静, 刘莹, 张明辉. 京津冀货物运输结构调整策略研究[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 88-93.
[7]
常云涛, 王奕彤. 连续流交叉口信号配时优化模型[J]. Journal of Highway and Transportation Research and Development, 2018, 12(4): 66-74.
[8]
林丽, 冯辉, 朱泳旭. 基于Ring-Barrier相位的干线公交协调控制[J]. Journal of Highway and Transportation Research and Development, 2018, 12(4): 85-91.
[9]
胡祖平, 何建佳. 基于网络可靠性的街区开放适宜度研究[J]. Journal of Highway and Transportation Research and Development, 2018, 12(4): 51-58.
[10]
陈红, 马晓彤, 赵丹婷. 基于元胞自动机的破损路面车辆换道仿真研究[J]. Journal of Highway and Transportation Research and Development, 2018, 12(4): 75-84.
[11]
李新, 毛剑楠, 骆晨, 刘澜. 基于MFD的路网可扩展边界控制方法研究[J]. Journal of Highway and Transportation Research and Development, 2018, 12(4): 59-65.
[12]
姚佼, 徐洁琼, 倪屹聆. 城市干道多时段协调控制优化研究[J]. Journal of Highway and Transportation Research and Development, 2018, 12(3): 60-70.
[13]
潘兵宏, 余英杰, 武生权, 严考权. 基于UC-win/Road仿真的高速公路出口预告标志前置距离研究[J]. Journal of Highway and Transportation Research and Development, 2018, 12(3): 71-79.
[14]
何南, 李季涛. 考虑运输方式间影响关系的公路客运交通需求预测[J]. Journal of Highway and Transportation Research and Development, 2018, 12(3): 90-96.
[15]
胡鹏, 帅斌, 吴贞瑶, 李浩歌. 城市危险品道路运输网络的设计和分析[J]. Journal of Highway and Transportation Research and Development, 2018, 12(3): 97-104.