|
|
|
| Reasonable Reinforcement Ratio of CRC+AC Composite Asphalt Pavements |
| LI Sheng, LI Yu-zhi, LIU Zhao-hui |
| Key Laboratory of Special Environment Road Engineering of Hunan Province, Changsha University of Science and Technology, Changsha Hunan 410004, China |
|
|
|
|
Abstract The longitudinal reinforcement design was analyzed under current specifications of cement concrete pavement design for highway, considering the structural characteristics and limitations of existing studies on continuously reinforced concrete and asphalt concrete (CRC+AC) composite pavements. By using heat transfer theory and the finite element method, the temperature effect of the asphalt concrete (AC) layer was examined, and the influence of the temperature effect on the longitudinal reinforcement ratio of CRC+AC composite pavements was calculated and analyzed. The results show that (1) the longitudinal reinforcement design of CRC+AC composite pavements can disregard spalling, seepage, and thrust failure and only consider the tensile failure of reinforcement; (2) the longitudinal reinforcement ratio of CRC+AC composite pavements can be reduced through the efficient heat insulation of the AC layer, for instance, when the thickness of the AC layer is 10 cm, the longitudinal reinforcement ratio of the CRC layer can be reduced by approximately 0.12%; and (3) the sliding stent is recommended to be used in reinforcement erection, with banding method employed for jointing longitudinal reinforcement with an overlapped length that is approximately 35 times of the reinforcement diameter.
|
|
Received: 26 April 2012
|
| Fund:Supported by the National Natural Science Foundation of China (No.51178062,No.51038002);the Higher School Science Research Project in Hunan Province (No.12C0014);and Ph.D Programs Foundation of Ministry of Education of China(No.20114316110001) |
|
Corresponding Authors:
LI Sheng, lishengttt@163.com
E-mail: lishengttt@163.com
|
|
|
|
[1] HUANG Yang-xian. Pavement Analysis and Design[M].Beijing:China Communications Press, 1998. (in Chinese)
[2] HU Chang-shun, WANG Bing-gang. Design Principle and Construction Technology of Composite Pavements[M]. Beijing:China Communications Press, 1999. (in Chinese)
[3] KIM S M, WOM M C, MCCULLOUGH B F. Mechanistic Analysis of Continuously Reinforced Concrete Pavements[R].Austin, TX:University of Texas at Austin, 2001.
[4] JTG D40-2002, Specifications of Cement Concrete Pavement Design for Highway[S]. (in Chinese)
[5] YANG Shi-ming, TAO Wen-quan. Heat Transfer[M]. Beijing:Higher Education Press,2006. (in Chinese)
[6] CHEN Ai-ling. Engineering Thermodynamics and Heat Transfer[M].Dalian:Dalian Maritime University Press, 2005. (in Chinese)
[7] LIAO Gong-yun, HUANG Xiao-ming. Application of ABAQUS Finite Element Software in Highway Engineering[M]. Nanjing:Southeast University Press, 2008. (in Chinese)
[8] HKS Inc. ABAQUS/Standard User's Manual Version 6.0[M].Pennsylvania:Hibbitt, Karlsson & Sorensen, Inc., 2002.
[9] LI Jia, ZHU Wei-ping, HUANG Xin-yan. Thermal Stress Analysis of CRCP+AC Composite Pavement under Non-uniform Temperature Distribution[J]. Journal of Hunan University:Natural Science Edition, 2009,36(10):13-18. (in Chinese)
[10] KANG Hai-gui, ZHENG Yuan-xun, CAI Ying-chun, et al. Regression Analysis of Actual Measurement of Temperature Field Distribution Rules of Asphalt Pavement[J].China Journal of Highway and Transport, 2007,20(6):13-16. (in Chinese)
[11] ZHAO Yong-li, ZHANG Dong. Study of Low Temperature Cracking of Asphalt Pavement Based on Cohesive Zone Model[J].Journal of Highway and Transportation Research and Development, 2010,27(1):11-15. (in Chinese)
[12] LIU Zhao-hui. Research on Rigid-flexible Continuously Reinforced Concrete Composite Asphalt Pavement[D]. Changsha:Changsha University of Science and Technology, 2007. (in Chinese) |
| [1] |
LI Ning, MA Biao, LI Rui, SI Wei. Performance of Unbound Aggregate Materials under Single-stage and Multi-stage Loading Modes Based on Precision Unbounded Material Analyzer[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 1-12. |
| [2] |
XU Hai-liang, REN He-huan, HE Zhao-cai, HE Lian. Time-domain Analysis of Deformation Characteristics of Asphalt Concrete Pavement Considering Vehicle-pavement Coupled Effect[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 13-19. |
| [3] |
DU Jian-huan, AI Chang-fa, HUANG Chao, GUO Yu-jin, JIANG Yun-bing. Effect of Interfacial Water on the Fatigue Performance of Composite Asphalt Mixture Beams[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 1-7. |
| [4] |
YAO Guo-qiang, YAN Zhi-xin, LONG Zhe, ZHAI Ju-yun. Simulation Experimental Study on Shear Stress Distribution of Rock Slope Anchoring Interface[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 8-15. |
| [5] |
LIU Ze, HE Fan, HUANG Tian-qi, JIANG Mei-dong. Additional Earth Pressure of Retaining Wall Caused by Vehicle Load[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 16-23. |
| [6] |
QIU Xin, XU Jing-xian, TAO Jue-qiang, YANG Qing. Asphalt Pavement Icing Condition Criterion and SVM-based Prediction Analysis[J]. Journal of Highway and Transportation Research and Development, 2018, 12(4): 1-9. |
|
|
|
|
2013, Vol. 7 
