|
|
|
| Determination of Compaction Temperature and Research on Pavement Performance of WMA Based on Bulk Density |
| XIAO Xin1, HUANG Kai-bin2 |
1. School of Civil Engineering and Transportation, South China University of Technology, Guangzhou Guangdong 510641, China;
2. Guangxi Qinzhou Linhai Industrial Investment Co., Ltd., Qinzhou Guangxi 535018, China |
|
|
|
|
Abstract Choosing two common warm mix modifiers (EC120 and Sasobit), adopting bulk density as the index to measure the effect of compaction, taking the temperature corresponding to the maximum density as optimum temperature, the asphalt mixture sample is formed under this temperature, and the road performance of warm mix asphalt is studied through immersion Marshall test, freeze-thaw split test, rutting test, bending and fatigue tests. The experimental result shows that (1) both modifiers can improve asphalt's high temperature performance, deformation resistance, and temperature sensitivity, while the low temperature performance of the asphalt is decreased a little; (2) water stability, high temperature stability, and fatigue resistance of the warm mix asphalt are all better than that of hot mix asphalt, whereas the low temperature crack resistance is mildly worse than that of hot mix asphalt. The paving of the experimental road proved to be better when the warm mix asphalt was used.
|
|
Received: 19 August 2013
|
|
Corresponding Authors:
XIAO Xin, cszcgz420@sina.com
E-mail: cszcgz420@sina.com
|
|
|
|
[1] TRB. Mix Design Practices for Warm Mix Asphalt,NCHRP REPORT 691[R]. Washington, D.C.:Transportation Research Board, 2011.
[2] ZUO Feng, YE Fen. Technology and Performance Evaluation for Foreign Warm Mix Asphalt[J]. Journal of China & Foreign Highway, 2007, 27(6):164-168. (in Chinese)
[3] GUO Ping, QI Feng, MI Hai-chen. Road Performance of Warm Mix Asphalt Mixture[J]. Journal of Chang'an University:Natural Science Edition, 2010, 30(3):10-13. (in Chinese)
[4] D'ANGELO J, HARM E, BARTOSZEK J, et al. Warm-Mix Asphalt:European Practice, International Technology Scanning Program, Report-FHWA-PL-08-007[R]. Washington, D. C.:FHWA, 2008.
[5] HUANG Kai-bin. Experimental Research on Road Performance of Warm Mix Asphalt and Mixture[D]. Changsha:Changsha University of Science and Technology, 2008. (in Chinese)
[6] ZHANG Qi-sen, HUANG Kai-bin. Experimental Research on Performance Evaluation of EC120 Modified Warm Mix Aspha1t[J]. Journal of China & Foreign Highway, 2009,29(4):174-177. (in Chinese)
[7] WANG Jie, JIA Yu. Summarization on Methods in Defining Mixing and Compaction Temperatures for Modified Asphalt Mixture[J]. Highway, 2002(12). 99-102. (in Chinese)
[8] JTG F40-2004, Technical Specification for Construction of Highway Asphalt Pavements[S]. (in Chinese)
[9] WU Chao-fan, ZENG Meng-lan, WANG Mao-wen, et al. Determination of the Mixing and Compaction Temperatures for Warm Mix Aspha1t with Sasobit[J]. Journal of Hunan University:Natural Science Edition, 2010, 37(8):1-5. (in Chinese)
[10] ZHANG Deng-liang. Asphalt Pavement Engineering Manual[M]. Beijing:China Communications Press, 2003. (in Chinese)
[11] JTJ052-2000,Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering[S]. (in Chinese)
[12] SHAO Qiang, WANG Lin, WU Guang-rong. The Effect of Warm Mix Asphalt with Sasobit on Performance of Asphalt and Asphalt Mixture[J]. Journal of China & Foreign Highway, 2010,30(1):251-254. (in Chinese)
[13] ZOU Gui-lian, ZHANG Xiao-ning, WANG Shao-huai, et al. Design of Full Asphalt Mixture by CAVF Method[J]. Highway,2002(3):76-79. (in Chinese)
[14] XU Pei-hua. Test Detection Technology of Subgrade and Pavement[M]. Beijing:China Communications Press, 2000. (in Chinese)
[15] WANG Bing-gang, ZHANG Qi-sen. Pavement Construction Manual[M]. Beijing:China Communications Press, 2008. (in Chinese) |
| [1] |
LI Ning, MA Biao, LI Rui, SI Wei. Performance of Unbound Aggregate Materials under Single-stage and Multi-stage Loading Modes Based on Precision Unbounded Material Analyzer[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 1-12. |
| [2] |
XU Hai-liang, REN He-huan, HE Zhao-cai, HE Lian. Time-domain Analysis of Deformation Characteristics of Asphalt Concrete Pavement Considering Vehicle-pavement Coupled Effect[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 13-19. |
| [3] |
DU Jian-huan, AI Chang-fa, HUANG Chao, GUO Yu-jin, JIANG Yun-bing. Effect of Interfacial Water on the Fatigue Performance of Composite Asphalt Mixture Beams[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 1-7. |
| [4] |
YAO Guo-qiang, YAN Zhi-xin, LONG Zhe, ZHAI Ju-yun. Simulation Experimental Study on Shear Stress Distribution of Rock Slope Anchoring Interface[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 8-15. |
| [5] |
LIU Ze, HE Fan, HUANG Tian-qi, JIANG Mei-dong. Additional Earth Pressure of Retaining Wall Caused by Vehicle Load[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 16-23. |
| [6] |
JIANG Ming, CHEN Yan-Yan, FENG Yi-dong, ZHOU Rui. Key Design Indicators for Roadside Warning Piles[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 79-87. |
|
|
|
|
2013, Vol. 7 
