|
|
|
| Methods for Calculating Shear Capacity on Oblique Section of Bending Members Strengthened with Enlarged Section |
| YANG Bin, CHEN Shi-hong |
| Guangzhou Municipal Engineering Group Co., Ltd., Guangzhou Guangdong 510060, China |
|
|
|
|
Abstract We infer that several equations currently used to calculate the bearing capacity of an oblique section of a member strengthened with an enlarged section have several mistakes in the specifications for strengthening the design of highway bridges (JTG/T J22-2008). The shear capacity of the oblique section of a bending member strengthened with an enlarged section could be more accurately and safely calculated using contrastive analysis of relevant design specifications and engineering calculation examples. We particularly challenged the calculation method in which the new stirrups bear the second increased shear based on the proportion of the section area of all web reinforcements. We proposed two calculation methods which can be applied to the general case of unilateral thickening of the member section and the reinforcement of three sides. We also tested an engineering example. The second proposed method, which considered the comprehensive shear capacity of concrete and stirrups, is simple and relatively safe. This method is unified with the design specification of an ordinary bridge component. The proposed method will be adopted in the technical specifications for strengthening of urban bridges which will be enacted soon.
|
|
Received: 26 June 2016
|
| Fund:E-mail address: yangbin2345@126.com |
|
Corresponding Authors:
YANG Bin
E-mail: yangbin2345@126.com
|
|
|
|
[1] JTG/T J22-2008, Specifications for Strengthening Design of Highway Bridges[S]. (in Chinese)
[2] GB 50367-2013, Code for Design of Strengthening Concrete Structure[S]. (in Chinese)
[3] JTG D62-2004, Code for Design of Highway Reinforced Concrete and Prestressed Concrete Bridges and Culverts[S]. (in Chinese)
[4] GB 50010-2010, Code for Design of Concrete Structures[S]. (in Chinese)
[5] ZHANG Shu-ren, WANG Zong-lin. Bridge Disease Diagnosis and Reinforcement Design[M]. Beijing:China Communications Press, 2006. (in Chinese)
[6] ZHANG Shu-ren, SONG Jian-yong, ZHANG Song-juan. Calculation Method and Test Investigation of Oblique Section Consolidation of Reinforced Concrete Bridge[J]. China Journal of Highway and Transport, 2003,16(3):64-68. (in Chinese)
[7] YE Jian-shu. Structure Design Principle[M]. Beijing:China Communications Press, 2007. (in Chinese)
[8] WANG Yuan-dong. Shear Strengthening of Damaged RC Beams with Method of Section Enlargement[D]. Beijing:Beijing University of Civil Engineeering and Architecture Press, 2013. (in Chinese)
[9] ZHANG Zhi. Study of Shear Capacity of Corroded RC Beams with Diagonal Reinforcements[D]. Changsha:Changsha University of Science & Technology, 2012. (in Chinese)
[10] ZUO Yin-bo. Experimental Study and Numerical Analysis on Shear Capacity of RC Beams with Diagonal Cracks[D]. Shenyang:Northeastern University, 2011. (in Chinese)
[11] AN Guan-feng. Technical Guide for Structural Strengthening of Urban Bridges[M]. Beijing:China Building Industry Press, 2015. (in Chinese)
[12] WU Xiao-guang, BAI Qing-xia, LEI Zi-xue. Applicative Calculation Example for Specifications of Strengthening Design of Highway Bridges[M]. Beijing:China Communications Press, 2011. (in Chinese) |
| [1] |
CHANG Zhu-gang, WANG Lin-kai, XIA Fei-long. Fluid-structure Interaction Numerical Simulation of Bridge Wind-induced Vibration Based on CV Newmark-β Method[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 28-37. |
| [2] |
XU Bai-shun, YAO Chao-yi, YAO Ya-dong, QIAN Yong-jiu, MA Ming. Carbon Fiber Reinforced Polymer-to-steel Interfacial Stress Parameter Sensitivity Based on Viscoelastic Constitutive[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 20-27. |
| [3] |
WEN Cheng, ZHANG Hong-xian. Influence of Material Time-dependent Performance on the Cantilever Construction of PSC Box Girder Bridge[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 38-44. |
| [4] |
LU Guan-ya, WANG Ke-hai, ZHANG Pan-pan. Seismic Design and Evaluation Methods for Small-to-Medium-Span Highway Girder Bridges Based on Machine Learning and Earthquake Damage Experience[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 24-37. |
| [5] |
YANG Yi-ming, PENG Jian-xin, ZHANG Jian-ren. Random Field Parameter Estimation of Service Bridge Component and Comparative Analysis of Estimation Methods[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 38-49. |
| [6] |
ZHAN Jian, SHAO Xu-dong, QU Wan-tong, CAO Jun-hui. Multi-parameter Fatigue Analysis of a Steel-super Toughness Concrete Lightweight Composite Bridge Deck[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 50-59. |
|
|
|
|
2017, Vol. 11 
