基于蒙特卡罗模拟的平行式加速车道长度模型

Abstract
Figure/Table
References (0)
Related Citation (15)

Abstract A model of a parallel-type acceleration lane length based on the dynamic merging process is established in this study to determine the need for parallel-type acceleration lane length of merging vehicles. The model considers road operation and design attributes, driver attributes, vehicle attributes, and several random attributes in the insertion process, and sets random attributes as the breakthrough point. Furthermore, Monte Carlo simulation is used to solve the model. The case study introduces the use of the model and proves its applicability.

Key words： traffic engineering length model Monte Carlo simulation parallel-type acceleration lane random attributes

Received: 25 August 2016

Fund:Supported by National Natural Science Foundation of China (No.61573098); Natural Science Foundation of Jiangsu Province(No.BK20151575)

Corresponding Authors: SHAO Zi-ke E-mail: shaozike2013@163.com

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	SHAO Zi-ke
	ZHANG Quan
	ZHANG Xiao-hui
	LI Wen-quan

Cite this article:

SHAO Zi-ke,ZHANG Quan,ZHANG Xiao-hui, et al. Model of Parallel-type Acceleration Lane Length[J]. Journal of Highway and Transportation Research and Development, 2018, 12(2): 81-87.

URL:

http://manu27.magtech.com.cn/Jwk_gljtkj_en/EN/ OR http://manu27.magtech.com.cn/Jwk_gljtkj_en/EN/Y2018/V12/I2/81

[1] JTG D20-2006, Design Specification for Highway Alignment[S]. (in Chinese).
[2] CJJ129-2009, Specification for Design of Urban Expressway[S]. (in Chinese).
[3] LI Tie-Zhu, LI Wen-quan,ZHOU Rong-gui,et al. Traffic Characteristics Analysis for Merging and Diverging in Acceleration and Deceleration Lane of Expressway[J]. Journal of Highway and Transportation Research and Development,2001,(4):89-91. (in Chinese).
[4] LI Wen-quan, WANG Wei,ZHOU Rong-gui. Headway Characteristics of Lane 1 on Expressway Merge Area[J]. Journal of Highway and Transportation Research and Development,2003,20(1):114-117. (in Chinese).
[5] LI Wen-quan, ZHOU Rong-gui. Traffic Flow Rate Model of Lane 1 on Expressway Merge Area[J]. Journal of Highway and Transportation Research and Development,2004,21(12):76-79. (in Chinese).
[6] SHAO Chang-qiao, YANG Zhen-hai,CHEN Jin-chuan,et al. A Probability Model for Length of Acceleration Lanes on Expressway[J]. Application of Statistics and Management,2004,20(4):42-45. (in Chinese).
[7] XUN Qiu-shi, REN Fu-tian,SUN Xiao-Rui,et al. Research on the Length of Acceleration Lane at Freeway Interchange[J]. Journal of Beijing University of Technology,2007,33(3):298-301. (in Chinese).
[8] CI Yu-sheng. On-off Ramp Junction Capacity and Ramp Setting on Urban Expressway[D]. Harbin:Harbin Institute Of Technology,2008. (in Chinese).
[9] WANG Chun-e. Length of Speed-change Lane at Highway Interchange[J]. Journal of Highway and Transportation Research and Development,2013,30(1):120-125. (in Chinese).
[10] SHI Xiao-fa,LI Wen-quan,LI Tie-Zhu,et al. Method of Designing Acceleration Lane Length in Freeway Interchange[J]. Journal of Henan University:Natural Science,2000,30(4):17-20. (in Chinese).
[11] XING Xiao-liang. Research on the Length of Speed Change Lane Expressway[D]. Xi'an:Chang'an University,2013. (in Chinese).
[12] TAN Yun-Long. Study on Lane-changing Model for Expressway Weaving Area in Microscopic Traffic Simulation[D]. Changchun:Jilin University,2014. (in Chinese).
[13] YUAN Zhong-dan, XUE Ling,WANG Wei-li. Length Design of Speed Change Lane at Interchanges of Expressway[J]. Journal of Chongqing Jiaotong University:Natural Science,2009,28(4):689-693. (in Chinese).
[14] LIU Zhao-bin. Research on Acceleration and Deceleration Lane Design Standard[D]. Nanjing:Southeast University,2001. (in Chinese).
[15] LUO Jing,TAN Yun-Long,HAN Yin. Length Design Method of Acceleration Lane on Expressway Weaving Area[J]. Computer Engineering and Applications,2015,(9):248-251. (in Chinese).