|
|
Comparison and Selection of Bridge Type Schemes Based on AHP and Grey Correlation TOPSIS |
XIE Quan-min1, YIN Jian-qiang1,2, YANG Wen-dong1 |
1. School of Civil Engineering and Architecture, Wuhan University of Technology, Wuhan Hubei 430070, China;
2. CSCEC AECOM Consultants Co., Ltd., Lanzhou Gansu 730000, China |
|
|
Abstract Determination of the optimal bridge scheme is crucial in the preliminary design stage of bridge construction, and the scientific decision results directly affect the construction and implementation of the whole project. At present, the determination of bridge schemes in mountainous areas is mainly based on empirical judgment, and few theoretical methods can be adopted. Therefore, a comprehensive evaluation model was built for mountainous bridge type scheme by the basic AHP theory, grey relational analysis, and TOPSIS. The model comprehensively considered the various factors affecting the selection of bridge type from the aspects of economy, technology, and society, and 12 evaluation indexes were selected to build a comprehensive evaluation system for the bridge type scheme in mountainous areas. Weight vector of valuation indexes of bridge type was calculated by AHP to reduce the influence of human subjective factors. Then, a weighted grey correlation coefficient decision matrix was constructed by fuzzy mathematics theory and grey correlation analysis, and the relative closeness coefficient between the alternative schemes and the Grey correlation ideal solution was calculated by TOPSIS. Finally, the optimal bridge type scheme was determined based on the relative closeness coefficient. The evaluation model was used to judge three alternative bridge type schemes (A1-A3) of a highway in the mountainous area of Pu'an County, Guizhou Province. The relative closeness coefficients of continuous PC T beam bridge (A1), PC continuous rigid frame bridge (A2), and PC dwarf-tower cable-stayed bridge (A3) were respectively 0.597 7, 0.315 6, and 0.400 3, indicating the first scheme is the best optimized bridge type. Thus, the first bridge scheme was applied to actual bridge construction and achieved good economic and social values. The results show that the evaluation model provides a feasible theoretical method for the decision-making of mountain bridge type.
|
Received: 05 June 2017
|
Fund:Supported by the National Natural Science Foundation of China (No.51779197) |
Corresponding Authors:
XIE Quan-min
E-mail: xiequanmin@126.com
|
|
|
|
[1] ZHOU Jian-ping. Comparison and Selection of Bridge Types on Highland Mountainous Expressway Crossing Valley Terrain[J]. Highway, 2013(5):81-84. (in Chinese)
[2] YAO Chang-rong, LI Ya-dong, LIANG Dong, et al. Structural Type Selection for Long Span Bridge in Mountainous Region[J]. Bridge Construction, 2012, 42(6):81-86. (in Chinese)
[3] MA Shi-bing, WANG Xuan-cang, WEI Lian-yu, et a1. Bridge Scheme Selection Based on Mutation Theory[J]. Journal of Highway and Transportation Research and Development, 2007, 24(10):68-71. (in Chinese)
[4] KUANG Zhi-long. Assessment of Bridge Types Adaptability Based on Catastrophe Progression Method[J]. Highway Engineering, 2014, 39(3):169-172. (in Chinese)
[5] JIANG xin-liang, WANG Bin-xing, DOU Yuan-ming, et a1. Application of comprehensive indicator system for optimization of bridge schemes[J]. China Civil Engineering Journal, 2009(7):65-68. (in Chinese)
[6] ZHAO song-xu, QIAN Cai, TIAN Yuan-fu. Application of AHP and Fuzzy Evaluation in the Multi-scheme Evaluation of Bridge[J]. Communications Standardization, 2007(11):75-78. (in Chinese)
[7] ZHANG Zhe, WANG Hui-li, SHI Lei, et a1. Application of Multi-levels and Multi-objectives Fuzzy Optimization Model of Bridge Type Selection[J]. Journal of Harbin Institute of Technology, 2006, 38(9):1567-1571. (in Chinese)
[8] SUN Ji-shu, CHAO Zhao-xia, YU Long, et a1. Multi-scheme Selection of Bridge Types Based on Grey Correlation Analysis[J]. Journal of Hebei University of Technology, 2011, 40(6):88-92. (in Chinese)
[9] WANG Ming-Hui. Selection of Bridge Type Design Scheme by Grey Correlation Analysis[J]. Railway Engineering, 2012(9):23-25. (in Chinese)
[10] WAN Feng, CHEN Chang-song, ZHANG Chen, et al. Application of Fuzzy Comprehensive Evaluation in Bridge Type Comparison[J]. Journal of China & Foreign Highway, 2015, 35(2):97-101. (in Chinese)
[11] SUN Hao, LIU Yong-jian, SUN Ming-yu, et a1. Comparison and Selection of Scheme Design and Fuzzy Hierarchy for Large-span Fabricated Emergency Highway Steel Bridge[J]. Journal of Chang'an University (Natural Science Edition) 2017, 37(2):55-63. (in Chinese)
[12] QI Xiu-ting, YAO Yong-chun. Multiple Attribute Evaluation Model for Bridge Design Based on Variation Coefficient Method and Set Pair Analysis[J]. Bulletin of Science and Technology, 2016, 32(2):189-192. (in Chinese)
[13] XU Shu-bai. Analytic Hierarchy Process[M]. Tianjin:Tianjin University Press,1988. (in Chinese)
[14] WANG Tao. Fuzzy Mathematics and Its Application[M]. Shenyang:Northeastern University Press, 2005. (in Chinese)
[15] LEE H, TOM M R. Adaptive Control Using a Universal Approximation for SISO Nonlinear Systems[J]. IEEE Trans Fuzzy Systems,2000,8(1):88-93.
[16] CHAN P T, RAD A B, WANG J. Indirect Adaptive Fuzzy Sliding Mode Control. Part Ⅱ:Parameter Project and Supervisory Control[J]. Fuzzy Sets and Systems,2001,119(1):159-161.
[17] XIN Li-li, GENG Hui, WANG Yong-min, et al. General Limited Information Diffusion Method of Small-sample Information Analysis in Insurance[J]. Journal of Shanghai University:English Edition, 2007,11(3):259-262.
[18] LIU Si-feng, GUO Tian-bang, DANG Yao-guo. Gray System Theory and Its Application[M]. Beijing:Science Press, 1999. (in Chinese)
[19] Department of Transportation Engineering Quality Supervision Bureau. Risk Assessment System and Guide of Construction Safety in Bridge and Tunnel Engineering[M]. Beijing:China Communications Press, 2011.(in Chinese) |
[1] |
CHANG Zhu-gang, WANG Lin-kai, XIA Fei-long. Fluid-structure Interaction Numerical Simulation of Bridge Wind-induced Vibration Based on CV Newmark-β Method[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 28-37. |
[2] |
XU Bai-shun, YAO Chao-yi, YAO Ya-dong, QIAN Yong-jiu, MA Ming. Carbon Fiber Reinforced Polymer-to-steel Interfacial Stress Parameter Sensitivity Based on Viscoelastic Constitutive[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 20-27. |
[3] |
WEN Cheng, ZHANG Hong-xian. Influence of Material Time-dependent Performance on the Cantilever Construction of PSC Box Girder Bridge[J]. Journal of Highway and Transportation Research and Development, 2019, 13(2): 38-44. |
[4] |
LU Guan-ya, WANG Ke-hai, ZHANG Pan-pan. Seismic Design and Evaluation Methods for Small-to-Medium-Span Highway Girder Bridges Based on Machine Learning and Earthquake Damage Experience[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 24-37. |
[5] |
YANG Yi-ming, PENG Jian-xin, ZHANG Jian-ren. Random Field Parameter Estimation of Service Bridge Component and Comparative Analysis of Estimation Methods[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 38-49. |
[6] |
ZHAN Jian, SHAO Xu-dong, QU Wan-tong, CAO Jun-hui. Multi-parameter Fatigue Analysis of a Steel-super Toughness Concrete Lightweight Composite Bridge Deck[J]. Journal of Highway and Transportation Research and Development, 2019, 13(1): 50-59. |
|
|
|
|