高原寒区冷补料加热搅拌装置设计及仿真与验证

Abstract
Figure/Table
References (0)
Related Citation (15)

Abstract In the plateau cold region of China, the highway maintenance line is long, the maintenance fund is insufficient, the annual average temperature is low, the air is thin, the temperature difference between day and night is large, and the freezing and thawing cycle is frequent and intense. These conditions lead to the poor highway maintenance in the cold region of the plateau. At present, cold patching materials are commonly used for daily maintenance in the plateau cold region. Due to the low-temperature construction environment in the plateau cold region, the moisture of cold patching materials after demulsification is not easy to evaporate, the compaction effect is weak, re-freezing and thawing easily occur after the temperature rises, and the maintenance quality is low. In order to avoid the restriction of season and weather on highway maintenance in plateau cold areas and to solve the problem of poor maintenance and construction quality of cold patching materials in plateau cold areas in low temperature environment, this paper proposes a scheme of heating emulsified asphalt cold patching materials to a certain temperature and then constructing it, and designs a heating and stirring system, a constant temperature control system, a control system circuit and other parts according to the scheme requirements, finally completing the overall design of the heating and stirring device. Then, working parameters such as stirring motor power 2 kW and stirring speed 30 r/min are determined through theoretical calculation. To verify that the design is reasonable, we established a 3D model of the heating device by using ANSYS CFX fluid analysis software. Simulation analysis was carried out on the heating device, and the design parameters were optimized. On the basis of optimized parameters, production equipment of heating device prototype, and prototype field experiment, field experiment results show that the simulation and experimental results are in good fit and that the design parameters are reasonable. The results of this study can serve as a reference for highway maintenance in cold highlands.

Key words： road engineering heating stirring device ANSYS CFX cold patching material plateau cold region

Received: 03 September 2018

Fund:Supported by the Baoji University of Arts and Sciences Engineering Pre-research Project (No.GK1504)

Corresponding Authors: ZHANG Wei-liang E-mail: zhangweiliang-243@163.com

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Wei-liang
	LI Liang
	ZHANG Jun
	YE Min
	MA Biao

Cite this article:

ZHANG Wei-liang,LI Liang,ZHANG Jun, et al. Design, Simulation, and Verification of a Heating and Stirring Device for Cold Patching Materials in the Plateau Cold Region of China[J]. Journal of Highway and Transportation Research and Development, 2019, 13(3): 14-21.

URL:

http://manu27.magtech.com.cn/Jwk_gljtkj_en/EN/ OR http://manu27.magtech.com.cn/Jwk_gljtkj_en/EN/Y2019/V13/I3/14

[1] WU Jing-min. Highway Engineering in Permafrost Region[M].Beijing:China Communications Press, 2005.(in Chinese)
[2] WANG Shuang-jie. Road Construction Technology in Permafrost Regions[M].Beijing:China Communications Press, 2008.(in Chinese)
[3] MA Qin-guo, LAI Yuan-ming, WU Dao-yong. Analysis of Temperature Field of High Grade Highway Embankment in Permafrost Regions[J]. Journal of Central South University:Science and Technology Edition, 2016,47(7):2415-2423.(in Chinese)
[4] WANG Shuang-jie, WANG Zuo, YUAN Kun, et al. Qinghai-Tibet Highway Engineering Geology in Permafrost Regions:Review and Prospect[J]. China Journal of Highway and Transport, 2015, 28(12):1-8.(in Chinese)
[5] ZHANG Yu-zhi, DU Yan-liang, SUN Bao-chen, et al. Roadbed Deformation of High-speed Railway due to Freezing-thawing Process in Seasonally Frozen Regions[J]. Chinese Journal of Rock Mechanics and Engineering, 2014, 33(12):2546-2553.(in Chinese)
[6] XING Ao-xue. Study on Performance of Cold Recycled Mixture with Emulsified (Foamed) Asphalt[D]. Xi'an:Chang'an University,2010.(in Chinese)
[7] GUO Gui-ping. High-grade Highway Maintenance Technology and Maintenance Machinery[M].Beijing:China Communications Press, 2008.(in Chinese).
[8] ZHANG Wei-liang. The Tibetan Region Cold Patch Asphalt Mixture Multi-function Maintenance Equipment Design and Research[D]. Xi'an:Chang'an University,2013.(in Chnese)
[9] SI Wei, MA Biao, WANG Hai-nian, et al. Subgrade Top Temperature of Asphalt Pavement Structure in Permafrost Areas[J]. Journal of Chang'an University:Natural Science Edition, 2012, 32(6):16-22,32.(in Chinese)
[10] MA Biao,WEI You-po,WANG Lei. Analysis on Flexural Tensile Characteristics of Asphalt Mixture in Cold Plateau Region[J].Journal of Highway and Transportation Research and Development,2010,27(3):44-48.(in Chinese)
[11] LI Xuan,MA Deng-cheng,YANG Shi-min. Research on Heating Method of Asphalt Pavement Hot In-place Recycling[J]. Journal of Central South University:Science and Technology,2016,47(4):1290-1296.(in Chinese)
[12] FU Ming-yu,ZHANG Li-na,WANG Jian-qin. Aerodynamic Simulation Of Air Cushion Vehicle Body Using CFX[J].Journal of Huazhong University of Science and Technology:Natural Science Edition, 2013,41(6):90-93,127.(in Chinese)
[13] DENG Qiang-min, NI Fu-jian, GU Xing-yu, et al. Rational Simplified Model of Finite Element Analysis for Deck Pavement of Long-span Steel Bridge[J]. Journal of Traffic and Transportation Engineering, 2008, 8(2):53-58.(in Chinese)
[14] ZINK F,VIPPERMAN J,SCHAEFER L.CFD Simulation of Thermoacoustic Cooling[J].International Journal of Heat and Mass Transfer, 2010,53(19-20):3940-3946.
[15] MOUSAZADEH F, AKKER H.MUDDE R F. Eulerian Simulation of Heat Transfer in a Trickle Bed Reactor With Constant Wall Temperature[J]. Chemical Engineering Journal,2012, 208(1):675-682.
[16] SIVILEVIČIUS H, PODVEZKOB V, VAKRINIEN S. The Use of Constrained and Unconstrained Optimization Models in Gradation Design of Hot Mix Asphalt Mixture[J]. Construction and Building Materials,2011,25(1):115-122.
[17] WANG Yong-fei,WANG Cheng-guo. The Application of Response Surface Methodology[J]. Journal of Minzu University of China:Natural Science Edition,2005,14(3):236-240.(in Chinese)
[18] LIU Jing-bo, DU Xiu-li. Structural Dynamics[M]. Beijing:China Machine Press, 2005.(in Chinese)