摘要To study the influence factors of low-temperature performance of semi-flexible pavement materials, a freezing test was conducted, and the cracking temperature was used as the evaluation index to study the influence of asphalt type (90 matrix asphalt, SBS-modified asphalt, TPS high-viscosity modified asphalt), cement-based grout material types (ordinary grout, rubber powder grout, emulsified asphalt grout), and skeleton void ratio (20%, 24%, 28%, 32%) on the low-temperature performance of semi-flexible pavement materials. Results indicate that the freezing test can effectively distinguish the low-temperature crack resistance improvement benefits of semi-flexible pavement materials with different asphalt, cement-based grouting materials, and skeleton void ratios. Cracking temperature can effectively evaluate the low-temperature performance of semi-flexible pavement materials. The substrate void ratio is in the range of 20%-32%, and the cracking temperature changes with the increase in the substrate void ratio, decreasing initially and then rising. When the void ratio is around 24%, the best low-temperature performance of semi-flexible materials is achieved. The improvement effect of the elasticity of grout on the low-temperature crack resistance of semi-flexible pavement materials is obvious; the improvement effect of emulsified asphalt grout on the low-temperature performance of semi-flexible pavement materials is better than that of rubber powder grout. After the modified asphalt is used in the substrate, the cracking temperature is reduced by 31.4%-38.3%, which is much greater than the effect of grouting. At the same time, the elasticity of the base asphalt is more effective than the viscosity increase in improving the low-temperature crack resistance of semi-flexible materials.
Abstract：To study the influence factors of low-temperature performance of semi-flexible pavement materials, a freezing test was conducted, and the cracking temperature was used as the evaluation index to study the influence of asphalt type (90 matrix asphalt, SBS-modified asphalt, TPS high-viscosity modified asphalt), cement-based grout material types (ordinary grout, rubber powder grout, emulsified asphalt grout), and skeleton void ratio (20%, 24%, 28%, 32%) on the low-temperature performance of semi-flexible pavement materials. Results indicate that the freezing test can effectively distinguish the low-temperature crack resistance improvement benefits of semi-flexible pavement materials with different asphalt, cement-based grouting materials, and skeleton void ratios. Cracking temperature can effectively evaluate the low-temperature performance of semi-flexible pavement materials. The substrate void ratio is in the range of 20%-32%, and the cracking temperature changes with the increase in the substrate void ratio, decreasing initially and then rising. When the void ratio is around 24%, the best low-temperature performance of semi-flexible materials is achieved. The improvement effect of the elasticity of grout on the low-temperature crack resistance of semi-flexible pavement materials is obvious; the improvement effect of emulsified asphalt grout on the low-temperature performance of semi-flexible pavement materials is better than that of rubber powder grout. After the modified asphalt is used in the substrate, the cracking temperature is reduced by 31.4%-38.3%, which is much greater than the effect of grouting. At the same time, the elasticity of the base asphalt is more effective than the viscosity increase in improving the low-temperature crack resistance of semi-flexible materials.
基金资助:Supported by the Special Funds for Basic Scientific Research Business Expenses of Central Universities (No.2572018BJ16)
通讯作者:
WANG Li-ming
E-mail: Wlmdxx@126.com
引用本文:
王黎明, 隽海文. Research on the Influence Factors of Low-temperature Crack Resistance of Semi-Flexible Pavement Materials Based on Freezing Test[J]. Journal of Highway and Transportation Research and Development, 2020, 14(3): 37-43.
WANG Li-ming, JUAN Hai-wen. Research on the Influence Factors of Low-temperature Crack Resistance of Semi-Flexible Pavement Materials Based on Freezing Test. Journal of Highway and Transportation Research and Development, 2020, 14(3): 37-43.
[1] WANG Wei, HUANG Hui-ming, WEI Ru-xi, et al. Optimization Design Principle of Poured Cement Slurry Ratio for Semi-flexible Pavement[J]. Journal of Highway and Transportation Research and Development,2017,34(5):35-41. (in Chinese) [2] WANG Wei-ming, GAO Dan,WU Kuang-huai. The Research of Performance on Semi-flexible Pavement Materials[J]. Highway Engineering,2014,39(1):78-82. (in Chinese) [3] ZHONG Ke, LIU Guo-qiang, WEI Xiao-hao, et al. Experimental Study on Asphalt Mixture with Latex Modified Cement Mortar[J]. Journal of Highway and Transportation Research and Development,2017,34(10):1-5. (in Chinese) [4] WEI Lu. Research on Application of Semi-flexible Anti-rut Pavement Technology[D]. Suzhou:Suzhou University of Science and Technology,2018. (in Chinese) [5] CHENG Lei, HAO Pei-wen. Mixture of Cement Slurry with Semi-flexible Pavement[J]. Journal of Chang'an University:Natural Science Edition,2002,22(4):1-4. (in Chinese) [6] ZHANG Xiao-yan, CHENG Zhi-qiang, KONG Fan-sheng. Low Temperature Performance of Semi-flexible Pavement with CA Grouting Material[J]. Journal of Beijing University of Technology,2017,43(8):1205-1211. (in Chinese) [7] HUANG Chong. Volume Stability and Crack Resistance of Semi-flexible Pavement Materials[D]. Wuhan:Wuhan University of Technology,2010. (in Chinese) [8] ZHOU Liang. Temperature Adaptability and Failure Mode Analysis of Semi-flexible Composite Pavement[D]. Chongqing:Chongqing Jiaotong University,2016. (in Chinese) [9] DING Qing-jun, SUN Zheng, ZHANG Rong-zhen. Analysis of Influence of Volume Parameters of Base Asphalt Mixture on Performance of Semi-flexible Pavement Materials[J]. Highway,2009(10):194-197. (in Chinese) [10] ZHAO Guo-qiang, HUANG Chong,DENG Cheng, et al. Performance of Semi-flexible Pavement with Different Type of Asphalt[J]. Highway Engineering, 2017,42(1):199-201. (in Chinese) [11] LING Tian-qing, ZHOU Jie, ZHAO Zhi-jie, et al. Study on Optimization of Polymer Modified Cement Slurry for Poured Semi-flexible Pavement[J]. Journal of Highway and Transportation Research and Development,2009,26(6):24-28. (in Chinese) [12] TAN Yi-qiu, ZHANG Lei, XUE Zhong-jun. Research and Development of Asphalt Mixture Freezing Test Equipment and Experimental Verification[J]. Journal of Highway and Transportation Research and Development,2011,28(5):17-22. (in Chinese) [13] LI Jian-jun. Study on Low Temperature Crack Resistance of Zirconium Tungstate Modified Asphalt Cement and Asphalt Mixture[D]. Harbin:Harbin Institute of Technology,2016. (in Chinese) [14] CAO Qiang. Research on Material Composition Design and Performance of Durable Asphalt Concrete Pavement in Cold Regions[D]. Tianjin:Tianjin University,2014. (in Chinese) [15] Japan Association of Roads. Explain for General Code of Asphalt Pavement Engineering[M]. Tokyo:Maruzen Co.,Ltd.,1992. (in Japanese) [16] TAN Yi-qiu, ZHANG Lei, LIU Hao,et al. An Evaluation of Several Kinds of Asphalt Mixtures' Low-temperature Performance Based on TSRST[J]. Highway,2010(1):171-175. (in Chinese) [17] ZHANG Cai-li, MENG Qing-ying, HAN Sen. Evaluation Method of Low-temperature Anti-cracking Performance of Superpave Asphalt Mixture[J]. Journal of Chongqing Jiaotong University:Natural Science Edition,2010,29(3):394-397. (in Chinese) [18] LI Zhen-min. Study on Temperature Stability of Semi-flexible Pavement Composites Impregnated with Rubber Powder[D]. Liuzhou:Guangxi University of Science and Technology,2013. (in Chinese)
2020, Vol. 14 
