摘要In order to objectively characterize the nonlinear viscoelastic behavior of asphalt mixture and its dependence on temperature and load, the two-point dynamic flexural tensile modulus test of asphalt mixture at different strain levels, temperatures and loading frequencies is carried out by using French trapezoidal beam tester. By introducing the method of nonlinear operator, the dynamic modulus dependency modeling method for asphalt mixture based on temperature and strain parameters is put forward, the expression of dynamic modulus principal surface of asphalt mixture is established, and the reliability of the dynamic modulus dependent model is evaluated by correlation coefficient test and variance analysis method. The result shows that (1) for the two-point flexural tensile test of trapezoidal beam based on asphalt mixture of full-scale test track, the mean values of dynamic modulus variation coefficient at 0℃ and 45℃ are about 2.5% and 6.2% respectively, the mean values of dynamic modulus variation coefficient at 10 test temperatures is about 4%, the variation level of the test method is low, the error is small, which has a very good parallelism and reliability; (2) for the established dynamic modulus dependent model expression based on temperature and strain parameters, the decision coefficient R2 can reach more than 0.99, the P value of F test is 0, the fitting effect of the model on the test result is good, and there is a significant correlation of dynamic modulus with temperature and strain level; (3) the model can be used to describe the dynamic flexural tensile modulus of asphalt mixture, and the description model of the dynamic modulus can be transformed from principal curve to principal surface. In pavement structure analysis, this model can reflect the nonlinear response phenomenon in actual pavement more objectively, and can avoid the problems such as distortion of the calculation result caused by unreasonable modulus value in structural analysis effectively.
Abstract：In order to objectively characterize the nonlinear viscoelastic behavior of asphalt mixture and its dependence on temperature and load, the two-point dynamic flexural tensile modulus test of asphalt mixture at different strain levels, temperatures and loading frequencies is carried out by using French trapezoidal beam tester. By introducing the method of nonlinear operator, the dynamic modulus dependency modeling method for asphalt mixture based on temperature and strain parameters is put forward, the expression of dynamic modulus principal surface of asphalt mixture is established, and the reliability of the dynamic modulus dependent model is evaluated by correlation coefficient test and variance analysis method. The result shows that (1) for the two-point flexural tensile test of trapezoidal beam based on asphalt mixture of full-scale test track, the mean values of dynamic modulus variation coefficient at 0℃ and 45℃ are about 2.5% and 6.2% respectively, the mean values of dynamic modulus variation coefficient at 10 test temperatures is about 4%, the variation level of the test method is low, the error is small, which has a very good parallelism and reliability; (2) for the established dynamic modulus dependent model expression based on temperature and strain parameters, the decision coefficient R2 can reach more than 0.99, the P value of F test is 0, the fitting effect of the model on the test result is good, and there is a significant correlation of dynamic modulus with temperature and strain level; (3) the model can be used to describe the dynamic flexural tensile modulus of asphalt mixture, and the description model of the dynamic modulus can be transformed from principal curve to principal surface. In pavement structure analysis, this model can reflect the nonlinear response phenomenon in actual pavement more objectively, and can avoid the problems such as distortion of the calculation result caused by unreasonable modulus value in structural analysis effectively.
金海兵, 周兴业, 鞠志成, 单伶燕. Study on Dynamic Modulus Dependence Model for Asphalt Mixture Based on Temperature and Strain Parameters[J]. Journal of Highway and Transportation Research and Development, 2020, 14(3): 70-77.
JIN Hai-bing, ZHOU Xing-ye, JU Zhi-cheng, SHAN Ling-yan. Study on Dynamic Modulus Dependence Model for Asphalt Mixture Based on Temperature and Strain Parameters. Journal of Highway and Transportation Research and Development, 2020, 14(3): 70-77.
[1] YAO Zu-kang. Structural Design of Asphalt Pavements[M].Beijing:China Communications Press,2011. (in Chinese) [2] LING Tian-qing,WANG Shi-jie,XU Zhi-hong. Study of Nonlinear Analysis of Flexible Pavements[J].China Journal of Highway and Transport,1999,12(1):1-6. (in Chinese) [3] LING Tian-qing,WANG Shi-jie,XU Zhi-hong. Some Problem in Nonlinear Analysis Flexible Pavement[J]. Journal of Chongqing Jiaotong Institute:Natural Science Edition, 1994, 13(5):35-40. (in Chinese) [4] WITCZAK M W,ANDREI D, MIRZA W.Development of Revised Predictive Model for the Dynamic(Complex) Modulus of Asphalt Mixtres, Inter-team Technical Report,NCHRP 1-37A[R]. Washington,D.C.:University of Maryland,1999. [5] HIRSCH T J. Modulus of Elasticity of Concrete Affected by Elastic Moduli of Cement Paste Matrix and Aggregate[J]. Journal of the American Concrete Institute,1962, 59(3):427-452. [6] CHRISTENSEN D W, Jr, PELLINEN T, BONAQUIST R F. Hirsch Model for Estimating the Modulus of Asphalt Concrete[J]. Journal of Association of Asphalt Paving Technologists, 2003, 72:97-121. [7] JTG D50-2017,Specifications for Design of Highway Asphalt Pavement[S]. (in Chinese) [8] KIM Y R,LITTLE D,SONG I. Effect of Mineral Fillers on Fatigue Resistance and Fundamental Material Characteristics:Mechanstic Evaluation[J]. Trans-portation Research Road,2003,1832:1-8. [9] ZHOU Xing-ye,WANG Xu-dong, SU Bo. Study on Mechanical Response Test Method for Real Pavement Structure Model[J]. Journal of Highway and Transpor-tation Research and Development,2017,34(6):23-29. (in Chinese) [10] ZHANG Peng,GUO Xing-yu,WANG Xu-guang,et al. Research on Experiment Equipment Technology of Full-size Road Surface Loading[J].Journal of Shandong Jiaotong University,2011,19(4):41-45. (in Chinese) [11] METCALF J B. Application of Full-scale Accelerated Pavement Testing[M].Washington, D.C.:Nation Academy Press,1996. [12] HUANG Y H. Pavement Analysis and Design[M].Upper Saddle River, NJ:Prentice Hall,1993. [13] PRIEST A L,TIMM D H.A Full-scale Pavement Structural Study for Mechanistic-empirical Pavement Design[J].Journal of the Association of Asphalt Paving Technologists,2005,74:519-556. [14] WEI Jin-cheng,WANG Lin,YANG Yong-shun,et al. Numerical Simulation of Mechanical Response of Perpetual Road Test Asphalt Pavement[J].Journal of Highway and Transportation Research and Development, 2010,27(6):15-19,33. (in Chinese) [15] DONG Ze-jiao,LIU Hao,TAN Yi-qiu,et al. Field Measurement of Three-Direction Strain Response of Asphalt Pavement[J].Journal of South China University of Technology:Natural Science Edition,2009,37(7):46-51. (in Chinese) [16] TIAN Ze-feng,FAN Xing-hua,LIU Yun-quan. Introduction of Full Scale Accelerated Pavement Test on Asphalt Pavement Practice[M].Shenyang:Northeastern University Press,2012. (in Chinese) [17] GUO Da-zhi,FENG De-cheng. Layered Elastic System Mechanics[M].Harbin:Harbin Institute of Technology Press,2001. (in Chinese) [18] WANG Xu-dong. Design of Pavement Structure and Material for Full-scale Test Track[J]. Journal of Highway and Transportation Research and Development, 2017,34(6):30-37. (in Chinese)
2020, Vol. 14 
