Natural Vibration Frequency Analysis for a PC Continuous Box Girder Bridge with Corrugated Steel Web Based on the Dynamic Stiffness Matrix

Abstract
Figure/Table
References (0)
Related Citation (15)

Abstract In order to reasonably analyze the influence of shear deformation of corrugated steel web on the natural vibration frequency of PC continuous box girder bridge with corrugated steel webs, first, the element stiffness matrix of PC box girder bridge with corrugated steel webs is derived by using the energy variation principle. Second, according to the derived element stiffness matrix, the solution program for calculating thenatural frequency of multi-span uniform cross-section PC continuous box girder bridge with corrugated steel webs considering the influence of steel web shearing effect is compiled by MATLAB software. The correctness of the natural vibration frequencies calculated by the MATLA B software is verified by the measured frequency of the constructed bridge and the calculated value by ANSYS 3D FE method. Finally, the influence parameters of the bending vibration frequency of the abovementioned bridge are analyzed. The result shows that (1) The natural frequencies calculated by the proposed program are in good agreement with the measured and FE values of the built bridges. The calculation program has higher precision, the difference of the first 5-order natural frequencies is within 6.01% and 7.32%.(2) The shear defomation effect of corrugated steel webs has great influence on the natural frequency of the subject bridge, while the modification of the shear modulus of corrugated steel webs and the type of corrugated steel webs has little influence on the bending vibration frequency of the bridge, the difference of the first 5-order bending vibration frequencies is within 1.07% and 0.55%, which can be ignored.(3) The dynamic analysis of the subject bridge considering the shear deformation effect can be easily incorporated into the matrix displacement system of the common framed structure, which avoids the complexity of the establishment and solution of the ANSYS FE model, It provides a reference for the calculation and analysis of the bending vibration frequency of the bridge type.

Key words： bridge engineering vertical bending vibration frequency dynamic stiffness matrix continuous box girder bridge principle of potential energy stationarity

Received: 15 July 2019

Fund:Supported by the National Natural Science Foundation of China (Nos. 51868039,51708269); Foundation of A Hundred Youth Talents Training Program of Lanzhou Jiaotong University and the Postdoctoral Science Foundation of China (No. 2018M643766)

Corresponding Authors: JI Wei E-mail: jiwei1668@163.com

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	JI Wei
	LUO Kui
	MA Wan-liang

Cite this article:

JI Wei,LUO Kui,MA Wan-liang. Natural Vibration Frequency Analysis for a PC Continuous Box Girder Bridge with Corrugated Steel Web Based on the Dynamic Stiffness Matrix[J]. Journal of Highway and Transportation Research and Development, 2020, 14(1): 65-74.

URL:

http://journal10.magtechjournal.com/Jwk_gljtkj_en/EN/ OR http://journal10.magtechjournal.com/Jwk_gljtkj_en/EN/Y2020/V14/I1/65

[1] CHEN Yiyan. Composite Design and Construction of Composite Box Girder with with Corrugated Steel Webs[M]. Beijing:China Communications Press, 2009:1-12.
[2] NGUYEN N D, HAN S R, KIM J H, et al. Moment Modification Factors of I-girder with Trapezoidal Web Corrugations under Moment Gradient[J]. Thin-Walled Structures, 2012, 57(8):1-12.
[3] YI J, GILB H, YOUM K, et al. Interactive Shear Buckling Behavior of Trapezoidally Corrugated Steel Webs[J]. Engineering Structures, 2009, 30(6):1659-1666.
[4] ELDIB M. Shear Buckling Strength and Design of Curved Corrugated Steel Webs for Bridges[J]. Journal of Constructional Steel Research, 2009, 65(12):2129-2139.
[5] HASSANEIN M F, KHABROOB O F. Sheer Bucking Behavior of Tapered Bridge Girders with Steel Corrugated Webs[J]. Engineering Structures, 2014, 74(9):157-169.
[6] MOON J, YI J, CHOI B H, et al. Shear Strength and Design of Trapezoidally Corrugated Steel Webs[J]. Journal of Constructional Steel Research, 2009, 65(5):1198-1205.
[7] MOON J, YI J W, CHOI B H, et al. Lateral-torsional Buckling of I-girder with Corrugated Webs under Uniform Bending[J]. Thin-Walled Structures, 2009, 47(1):21-30.
[8] NIE Jianguo, LI Faxiong. Theory Model of Corrugated Steel Web Girder Considering Web Shear Behavior[J]. China Journal of Highway and Transport, 2011, 24(6):40-48.
[9] NIE Jianguo, LI Faxiong, FAN Jiansheng. Effective Stiffness Method for Calculatiing Deformation of Corrugated Web Girder[J]. Engineering Mechanics, 2012, 29(8):71-79.
[10] LIU Baodong, REN Hongwei, LI Pengfei, et al. Deflection Analysis Considering the Characteristics of Box Girder with Corrugated Steel Webs[J]. China Railway Science, 2011, 32(3):21-26.
[11] REN Hongwei, LIU Baodong, CHEN Haibo. Analysis of Torsional Vibration of Concrete Box-girder with Corrugated Steel Webs[J]. China Journal of Highway and Transport, 2008, 21(6):64-68.
[12] ZHANG Yongjian, HUANG Pingming, DI Jin, et al. Free Vibration Characteristics and Experiment Study of Composite Box Girder with Corrugated Steel Webs[J]. Journal of Traffic and Transportation Engineering, 2008, 8(5):76-80.
[13] LI Bo, LIU Baodong, LI Pengfei, et al. Stress-related Damping Characterstic of a Composite Box-girder with Corrugated Steel Webs[J]. Journal of Vibration and Shock,2008, 8(5):76-80.
[14] JI Wei, DENG Lu, LIU Shizhong, et al. Calculation of the Vertical Bending Vibration Frequencies of Multi-span PCContinuous Box Girder Bridge with Corrugated Steel Webs of Uniform Cross-section[J]. Journal of Vibration and Shock, 2016, 35(18):140-146.
[15] JI Wei, LIU Shizhong, LIN Pengzhen, et al. Calculation and Study on Bending Vibration Frequencies of the PC Continuous Box Girder with Corrugated Steel Webs[J]. Journal of Vibration, Measurement & Diagnosis, 2016, 36(4):771-776.
[16] JI Wei, LIU Shizhong, LIN Pngzhen. Analysis and Experimental Study on Nature Vibration Frequencies of PC Continuous Box Girder Bridge with Corrugatad Steel Webs[J]. Journal of Central South University (Science and Technology), 2016, 47(4):1297-1304.
[17] JI Wei, LIU Shizhong, LIN Pengzhen. Experiment and Analysis for Vibration Frequency of Composite Box Girder with Corrugated Steel Webs[J]. China Journal of Highway and Transport, 2013, 26(5):102-107.
[18] SAMANTA A, MUKHOPADHYAY M. Finite Elementstatic and Dynamic Analyses of Folded Plates[J]. Engineering Structures, 1999, 21(3):277-287.
[19] ZENG Pan. Finite Element Analysis and Application[M]. Beijing:Tsinghua University Press, 2004:302-304.
[20] LI Mingyuan. Study on Constuction and Dynamic Characteristic of Pohe Bridge[J]. Communications Standardization, 2006(04):135-138.
[21] JTG D60-2015, General Code for Design of High-way Bridges and Culverts[S].