|
|
|
| Asphalt Mixture Proportion Design Method of Coarse Graded High-modulus Asphalt Concrete with Skeleton Embedded Structure |
| XIAO Qian1, JIN Hai-bing2, LIU Hai-yan2, XIAO Qing3 |
1. Research Institute of Highway Ministry of Transport, Beijing 100088, China;
2. China Road and Bridge Corporation, Beijing 100011, China;
3. Jiangxi Provincial Expressway Investment Group Co., Ltd., Nanchang Jiangxi 330025, China |
|
|
|
|
Abstract In view of heavy traffic situation of asphalt pavement and the project needs in China,a kind of mixdesign method of coarse graded high modulus asphalt concrete(HMAC25)with skeleton embedded structurewas proposed. A kind of low labeled hard asphalt with penetration degree of 30(0.1 mm)(AH-30)wasused as the cementing material of high modulus asphalt concrete,and the nominal maximum aggregate size isno smaller than 26.5 mm. The asphalt-aggregate ratio of the asphalt mixture was determined by using thedesign method of asphalt mixture based on aggregate closest compact condition. The result of laboratory testindicates that(1)compared with the required value in the related specification,the high temperaturestability of high modulus asphalt concrete made with the proposed method improved by more than 7 times;(2)compared with the maximum value recommended in the related specification,the compression resilientmodulus at 20℃ increased by nearly 30%;(3)the low temperature anti-cracking performance and moisturestability can also meet the requirements of the specification.
|
|
Received: 06 June 2020
|
|
Corresponding Authors:
XIAO Qian
E-mail: q.xiao@rioh.cn
|
|
|
|
[1] ZHANG Deng-liang. Asphalt Pavement[M]. Beijing:China Communications Press,1998. (in Chinese)
[2] LIANG Chun-yu. Test Study of No. 30 Hard Grade Asphalt Used for Mid or Lower Surface Layers of Asphalt Pavement[D]. Changchun:Jilin University,2007. (in Chinese)
[3] QIU Zi-ping,ZHENG Mu-lian. Numerical Simulation of Mechanics Behavior for High Modular Asphalt Concrete Pavement[J]. Urban Roads Bridges & Flood Control, 2011(6):258-261. (in Chinese)
[4] LI Zheng-quan,HAO Tong-tu,HE Xin-yuan. Mechanical Property of High-modulus Asphalt Concrete[J]. Communications Standardization,2011(20):47-50. (in Chinese)
[5] XIAO Qing-yi,YANG Wei-tao,TIAN Wen-ling,et al.Experimental Study on Road Use Performance of High Modulus Asphalt Concrete[J]. China Harbour Engineering,2011(3):42- 48. (in Chinese)
[6] BS EN 12591:2009,Bitumen and Bituminous BindersSpecifications for Paving Grade Bitumens[S].
[7] MA Feng,FU Zhen. Application of Hard Asphalt and High Modulus Asphalt Concrete in France[J]. Journal of China & Foreign Highway,2008,28(6):221-223. (in Chinese)
[8] TAN Mian, YUAN Hong-kai. Evaluation of High Temperature Performance to Hard Asphalt and Mixture[J]. Urban Roads Bridges & Flood Control,2010(1):32-39. (in Chinese)
[9] JTG F40-2004,Technical Specifications for Construction of Highway Asphalt Pavement[S]. (in Chinese)
[10] WANG Xu-dong. Discussion on a New Volume Design Method for Asphalt Mixture[J]. Shanghai Highways,2011(2):1-2. (in Chinese)
[11] WANG Xu-dong, ZHANG Lei. Optimal Bitumen -aggregate Ratio Selection Method of Hot Mix Asphalt Based on Closest Compaction Condition[J]. Journal of Testing and Evaluation,2009,37(5):490-495. (in Chinese)
[12] JTJ 052-2000,Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering[S]. (in Chinese)
[13] JTG 050-2006,Specifications for Design of Highway Asphalt Pavement[S]. (in Chinese) |
|
|
|
2020, Vol. 14 
