|
|
Punching Analysis of the Underlying Karst Rock Foundation Considering the Self-weight of Rock Mass |
LIU Ze-yu, LEI Yong, TAN Hao |
Hunan Key laboratory of Geotechnical Engineering Stability Control and Health Monitoring, Hunan University of Science and Technology, Xiangtan Hunan 411201, China |
|
|
Abstract The 3D equation of the ultimate bearing capacity Pb of the karst cave foundation under self-weight γ is established using the associated flow law in the upper limit method of limit analysis on the basis of the Hoek-Brown strength criterion and the punching failure mode of the karst cave foundation. In combination with the variational principle, the equation of the punching failure line and the ultimate bearing capacity expression of the karst cave foundation are derived. The ultimate bearing capacity Pb and critical hole diameter of the karst cave foundation under self-weight are calculated by programing. The theoretical rationality is verified by indoor model tests. The research shows that:(1) The influence of the rock RMR value and uniaxial compressive strength σc on the ultimate bearing capacity of the karst cave foundation has nothing to do with the consideration of the self-weight γ factor. Both factors increase with the increase in uniaxial compressive strength σc and RMR value, and vice versa. These factors decrease with the increase in self-weight γ; however, the change is obscured; (2) The ultimate bearing capacity of the karst cave foundation Pb basically linearly increases with the increase in the thickness of the roof h of the cave; when considering the self-weight σ and thickness of the roof h, the change of the ultimate bearing capacity Pb of the karst cave foundation mainly depends on the difference between the increment of the internal dissipative and gravity power; (3) When RMR<40, self-weight γ has a great influence on the critical span D of the cave, and when RMR>60, self-weight has a small influence on the critical span D of the cave; (4) When RMR ≤ 40, the influence of self-weight γ on the ultimate bearing capacity Pb must be considered; when RMR ≥ 70, self-weight γ must be considered when calculating the ultimate bearing capacity Pb of the karst cave foundation because the error is generally within 3%.
|
Received: 31 July 2020
|
Fund:Supported by the National Natural Science Foundation of China (No. 51878270) |
Corresponding Authors:
LIU Ze-yu
E-mail: 710323967@qq.com
|
|
|
|
[1] ZHANG Hui-le, ZHANG Zhi-hao, WANG Shu-hong, et al. Experimental Study and Analysis on Rock-socketed Pile in Karst Area[J]. China Civil Engineering Journal,2013,46(1):92-103. (in Chinese)
[2] ZHANG Hui-le, MA Lin, ZHANG Zhi-hao, et al. Test Research on Factors Influencing Bearing Capacity of Rock-socketed Piles in Karst Area[J]. Rock and Soil Mechanics,2013,34(1):92-100. (in Chinese)
[3] HU Qing-guo, ZHANG Ke-neng, YANG Jun-sheng. Finite Element Analysis of Ultimate Bearing Capacity of Strip Footing above Karst Cave[J]. Journal of Central South University:Science and Technology Edition, 2005(4):694-697. (in Chinese)
[4] LI Ren-jiang. Study on Ultimate Bearing Capacity of Upper Plate of Karst Cave[D]. Wuhan:Institute of Rock and Soil Mechanics, Chinese Academy of Sciences,2006. (in Chinese)
[5] LIU Zhi-kui, LIANG Jin-cheng, ZHU Shou-zeng, et al. Stability Analysis of Rock Foundation with Cave in Karst Area[J]. Chinese Journal of Geotechnical Engineering,2003,25(5):629-633. (in Chinese)
[6] LEI Yong, CHEN Qiu-nan, MA Bin-hui. Punching Analysis of Rock at Pile Tip Base on Limit Analysis[J]. Chinese Journal of Rock Mechanics and Engineering,2014,33(3):631-638. (in Chinese)
[7] LEI Yong, LIU Yi-xin, DENG Jia-zheng, et al. Calculation of Ultimate Bearing Capacity of Cave Roof under Punching Failure Mode[J]. Chinese Journal of Rock Mechanics and Engineering,2018,37(9):2162-2169. (in Chinese)
[8] LIU Yi-xin, LEI Yong, DENG Jia-zheng, et al. Calculation of Ultimate Bearing Capacity of Cavern Roof under Asymmetrical Load[J]. Journal of Highway and Transportation Research and Development,2020,37(4):104-110. (in Chinese)
[9] BAI Hua-jun. A Method for Calculating the Safety Rock Thickness of Pile Bearing Strata with Considering Deadweight of Karst Cave Roof[J]. Rock and Soil Mechanics,2016,37(10):2945-2952. (in Chinese)
[10] LI Liang, SHI He-yang, ZENG Zhong-lin, et al. Variational Analysis of Bearing Characteristics of the Cavity under the Rigid Strip Foundation Based on the Nonlinear Mohr-Coulomb Failure Criterion[J]. Journal of Railway Science and Engineering,2018, 15(12):3089-3096. (in Chinese)
[11] ZENG Zhong-lin, ZENG Da-ting, LI Tao-yu, et al. Variation Analysis of Ultimate Bearing Punching Capacity of Roof Underlying the Rigid Strip Foundation in Karst Area[J]. Journal of Natural Disasters, 2018, 27(5):27-38. (in Chinese)
[12] YANG X L, HUANG F. Three-dimensional Failure Mechanism of a Rectangular Cavity in a Hoek-Brown Rock Medium[J]. International Journal of Rock Mechanics & Mining Sciences, 2013, 61:189-195.
[13] YAN Ruo-ming, ZHOU Guang-yu, TANG Jin, et al. Upper Bound Limit Analysis of Collapse Mechanisms of the Shallow Tunnel[J]. Journal of Railway Science and Engineering,2014,11(5):96-99. (in Chinese)
[14] CHEN W F. Limit Analysis and Soil Mechanics[M]. New York:Elsevier Scientific Publishing Company,1975.
[15] HOEK E, BROWN E T. Practical Estimate the Rock Mass Strength[J]. International Journal of Rock Mechanics and Mining Science,1997,34(8):1165-1186.
[16] SERRANO A, OLALLA C. Tensile Resistance of Rock Anchors[J]. International Journal of Rock Mechanics and Mining Sciences,1999,36(4):449-474.
[17] LEI Yong, YIN Jun-fan, CHEN Qiu-nan. The Experimental Study on Limit Bearing Capacity and Failure Mode of Pile End Bedrock in Karst Region[J]. Chinese Journal of Applied Mechanics,2017,34(4):774-780,822. (in Chinese)
[18] ZHAO Ming-hua, XIAO Yao, XU Zhuo-jun, et al. Study on Punching Shear Failure of Cave Roof in Karst Area Based on Mohr Failure Criterion[J]. Journal of Highway and Transportation Research and Development,2016,33(9):58-63. (in Chinese)
[19] ZHAO Ming-hua, ZHANG Rui, HU Bai-xue, et al. Analysis of Stability of Cave Roof under Pile Tip in Karst Area[J]. Journal of Highway and Transportation Research and Development, 2009, 26(9):13-16,31. (in Chinese)
[20] LEI Yong, YIN Jun-fan, CHEN Qiu-nan, et al. A Calculation Method and Experimental Study on Ultimate Bearing Capacity of Cave Roof[J]. Journal of Highway and Transportation Research and Development,2017,34(5):80-85. (in Chinese)
[21] RATHIE R N, SILVA P D. Applications of Lambert W Function[J]. International Journal of Applied Mathematics and Statistics,2011,23(D11):1-15.
[22] YANG Sheng-quan, YANG Jun-sheng. Rockmass Mechanics[M]. Beijing:China Machine Press, 2008:118-119. (in Chinese)
[23] MARINOS P, HOEK E. Estimating the Geotechnical Properties of Heterogeneous Rock Masses Such as Flysch[J]. Bulletin of Engineering Geology and the Environment, 2001, 60(2):85-92.
[24] HUDSON J A, HARRRISON J P. Engineering Rock Mechanics an Introduction to the Principles[M]. London:Pergamon Press, 1997. |
|
|
|