摘要Aimed at the working life of bridges under the reiteration function of vehicle load, which is not mentioned in the current bridge design codes, this paper introduced the concept of normal working life. The authors regarded reinforced concrete bridges as the research object and proposed a fast method to calculate the working life to judge whether the working life can fit the requirement of design working life. On the basis of the equivalent constant amplitude stress amplitude method of Miner's criterion, the cumulative damages of the bridges were calculated, the average annual damage degrees were obtained by determining the relationship between cumulative damages and times, and the working life of the bridges was estimated. This method was applied to the calculations of T-beam bridges, and the influences of spans, transverse diaphragms, reinforcement ratios, vehicle loads, and S-N curve equations were analyzed. The calculation results showed that vehicle loads and S-N curve equations determine the accuracy of working life. The calculated life in accordance with the fatigue vehicle model in the specification is much longer than the design life. The load varies greatly from region to region. Compared with Guizhou Province, Jiangsu and Liaoning provinces have a higher traffic flow of heavy vehicles over 35 t, which results in years unfilled with the design life. With the increase in spans, the working life increases accordingly because the reinforcement ratios increase with the spans. The diaphragm plates and reinforcement ratios have a great influence on the working life. The working life of bridges with diaphragm plates is 18%-63% lower than that of bridges without diaphragm plates. The reinforcement ratios are lower, and the reduction rates of the working life are greater.
Abstract：Aimed at the working life of bridges under the reiteration function of vehicle load, which is not mentioned in the current bridge design codes, this paper introduced the concept of normal working life. The authors regarded reinforced concrete bridges as the research object and proposed a fast method to calculate the working life to judge whether the working life can fit the requirement of design working life. On the basis of the equivalent constant amplitude stress amplitude method of Miner's criterion, the cumulative damages of the bridges were calculated, the average annual damage degrees were obtained by determining the relationship between cumulative damages and times, and the working life of the bridges was estimated. This method was applied to the calculations of T-beam bridges, and the influences of spans, transverse diaphragms, reinforcement ratios, vehicle loads, and S-N curve equations were analyzed. The calculation results showed that vehicle loads and S-N curve equations determine the accuracy of working life. The calculated life in accordance with the fatigue vehicle model in the specification is much longer than the design life. The load varies greatly from region to region. Compared with Guizhou Province, Jiangsu and Liaoning provinces have a higher traffic flow of heavy vehicles over 35 t, which results in years unfilled with the design life. With the increase in spans, the working life increases accordingly because the reinforcement ratios increase with the spans. The diaphragm plates and reinforcement ratios have a great influence on the working life. The working life of bridges with diaphragm plates is 18%-63% lower than that of bridges without diaphragm plates. The reinforcement ratios are lower, and the reduction rates of the working life are greater.
基金资助:Supported by the Special Fund Project of Science and Technology Innovation of Research Institute of Highway Ministry of Transport (No.2019-I113)
通讯作者:
ZUO Xin-dai
E-mail: 330217252@qq.com
引用本文:
左新黛, 张劲泉, 赵尚传. Calculation Method and Influence Factor Analysis for the Normal Working Life of Reinforced Concrete Highway Bridges[J]. Journal of Highway and Transportation Research and Development, 2021, 15(1): 31-44.
ZUO Xin-dai, ZHANG Jin-quan, ZHAO Shang-chuan. Calculation Method and Influence Factor Analysis for the Normal Working Life of Reinforced Concrete Highway Bridges. Journal of Highway and Transportation Research and Development, 2021, 15(1): 31-44.
[1] JTG D60-2015, General Specifications for Design of Highway Bridges and Culverts[S]. (in Chinese)
[2] SONG Yu-pu. Fatigue Behavior and Design Principle of Concrete Structures[M]. Beijing:China Machine Press, 2005. (in Chinese)
[3] ZHANG Yan-ling, LI Yun-sheng, WANG Xin-min. A Study of the Evaluation Method of Fatigue Life of Reinforced Concrete Beams after Speed-lifting[J]. Journal of Shijiazhuang Tiedao University,2004,17(2):54-57. (in Chinese)
[4] ZHU Hong-bing, YU Zhi-wu, JIANG Li-zhong. Calculation Method of Equivalent Constant Amplitude Fatigue Stress Amplitude Based on Corten-Dolan Cumulative Damage Criterion[J]. Highway Traffic Science and Technology,2010, 27(1):54-57. (in Chinese)
[5] ZENG Zhi-bin, LI Zhi-rong. Research on Fatigue S-N Curves of Reinforcing Bars in Common Reinforced Concrete Beams[J]. China Civil Engineering Journal, 1999,32(5):10-14. (in Chinese)
[6] Code for Design of Concrete Structures of Railway Bridge and Culvert[S]. (in Chinese)
[7] XU Xue-dong. Fatigue Life Prediction and Reliability Analysis of Existing Railway Concrete Bridges[J]. Railway Standard Design, 1996,14(3):28-35. (in Chinese)
[8] ZHOU Yong-tao, ZHAI Hui, BAO Wei-gang. Research on Standard Fatigue Vehicular Load for Highway Bridges[J]. Highway, 2009(12):21-25. (in Chinese)
[9] BS5400, Steel, Concrete and Composite Bridges, Part 10-Code of Practices for Fatigue[S].
[10] AASHTO. AASHTO LRFD Bridge Design Specifications (SI Units 4th edition)[S]. Washington, D.C.:AASHTO, 2007.
[11] BS EN 1991-2:2003 Eurocode 1, Actions on Structures. Part 2:Traffic Loads on Bridges[S].
[12] TONG Le-wei, SHEN Zu-yan. Fatigue Load Spectrum for Urban Road Bridges[J]. Journal of Civil Engineering, 1997,30(5):20-27. (in Chinese)
[13] WANG Rong-hui, CHI Chun. Study on the Model of the Fatigue-loaded Vehicles in Guangzhou Trestle Bridges[J]. Journal of Southeast University of Science and Technology:Natural Science Edition,2004,32(12):94-96. (in Chinese)
[14] CHEN Min. Research on Fatigue Vehicle Load Models of Highway and Bridge[R]. Shanghai:Tongji University, 2009. (in Chinese)
[15] LI Shao-jun. Fatigue Load Model and Fatigue Performance of Medium and Small Span Concrete Bridges[R]. Hangzhou:Zhejiang University, 2015. (in Chinese)
[16] JT-GQS 025-1984, Road Bridge and Culvert Design Drawing-Prefabricated Reinforced Concrete T-beams[S]. (in Chinese)
[17] ZHU Hong-bing. Research on Fatigue Test and Residual Life Prediction Method of Highway Reinforced Concrete Beam Bridges[D]. Changsha:Central South University, 2011. (in Chinese)
[18] TAO Ran. Research on Fatigue Life of Concrete Girder Bridges Considering Long-term Performance Degradation[R]. Nanjing:Southeast University, 2016. (in Chinese)
2021, Vol. 15 
